Epoxy Repair Universal
- Fast curing: 5-10 minutes
- Easy to apply
- Can be used indoors and outdoors
- Water resistant: suitable for continuous water exposure
- Even cures under water!
- Does not deform No shrinkage: remains in original form
- Chemical resistant
- Grinding, drilling, sawing and painting possible after curing
Properties
- Processing time: 5-10 minutes
- Solid after 30 min
- Grinding, drilling, sawing and painting possible after 60 min
- Final strength after 12 hours
- Easy to apply
- Can be used indoors and outdoors
- Water resistant: suitable for continuous water exposure
- Even cures under water!
- Does not deform
- No shrinkage: remains in original form
- Chemical resistant
Application
For 1001 repairs in and around the home, car, boat and caravan, machines and tools. Fill cracks and holes in stone, wood, steel, and many synthetics. Tip: Can also be used as a mouldable plug to fill screw holes.
Not suitable for PE (polyethylene), PP (polypropylene) and PTFE
Handling
Before use
Recommended application at temperatures between +10 °C and +25 °C.
The surface must be properly sanded and then cleaned and degreased.
A moist knife to cut off the required amount from the stick.
During use
Cut the required Epoxy Repair with a damp knife from the rod (reinsert foil). Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.
Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water.
After use
Remove fingerprints by rubbing with water or a damp cloth before curing starts.
Store in a dry, cool and frost free place.